ILT800 UV LED辐射计

ILT800 UV LED辐射计具有数据分析功能的UV辐射计，适用于UV LED测量应用特征可存储最多1000次测量数据测量范围：mW/cm² 至 40 W/cm²简易的CureRightTM PC接

ILT800 CureRight辐射计

ILT800 UV辐射计允许用户通过其集成的OLED显示屏，存储、下载和查看当前及所有先前保存的读数，从而随时间监控其固化过程。这种内置的数据存储和查看功能使用户能够快速看到随时间发生的变化。同时，它

ILT2400手持式光度计与光强计

ILT2400是市面上先进的手持式光度计/光强计。ILT的 Accuspan软件在快速测量超过8个数量级的光强度时， 会自动设置平均值。 内置软件允许客户捕捉最短达100微秒的峰值，并每 秒存储多达1

ILT2400 Handheld Photometer and Radiometer

ILT2400 is an advanced handheld photometer/light intensity meter on the market lLT's Accuspan software au.tomatically sets the average value when quickly measuring light intensities exceeding 8 orders of magnitudeThe built-in software allows customers to capture peaks as short as 100 microseconds and store up to 16 read.ings per second The color display screen supports landscape and portrait modes The lLT2400 supports variousoptical measurement applications, including audience scanning laser safety, general optical measurement, re-search, disinfection/ultraviolet disinfection, solar measurement, photoresist/lithography, optical radiation haz.ards, phototherapy, photodegradation, PPF and PPFD plant research. etc.

ILT800光谱滤光器

ILT800 光谱滤光器的设计是为了匹配光子发生器对紫外光的响应，这与 紫外光的吸收直接相关，且对波长具有很强的选择性。大多数灯发出宽 带紫外线/可见光/红外线，并且灯的输出可能不会在所有波长上均匀变

ILT800 Spectral Filter

The design of the ILT800 spectral filter is to match the response of the photon generator to ultraviolet light, which is directly related to the absorption of ultraviolet light and has strong selectivity for wavelength. Most lamps emit broadband ultraviolet/visible/infrared light, and the output of the lamp may not vary uniformly across all wavelengths. The design of the ILT800 filter is to monitor output changes in the region that affects absorption, thereby affecting the effectiveness of curing. Whether you are using low output fluorescent sources for disinfection, high-intensity mercury or xenon lamps for curing, or narrowband LEDs for lithography, there is an optimized version of ILT800 to meet your needs. The response curve for each filter option is shown below. Customized designs can also be provided.

医用电子内窥镜测试系统

系统专门针对医用电子内窥镜图像质量检测设计，符合 ISO 15739: 2017、ISO 15739: 2017、YY/T 1587-2018 、ISO 8600-3:2019、YY

Medical Electronic Endoscope Testing System

The system is suitable for testing medical electronic endoscope systems with various working distances, endoscope diameters, and lengths. It extends the standard testing functions of various products such as disposable electronic endoscopes, colonoscopes, and bronchoscopes, upgrades automation components, and improves the repeatability and accuracy of testing. It is suitable for quality control and design verification of products by endoscope manufacturers, product quality inspection and supervision, as well as scientific research.

医用内窥镜光纤测试系统

医用内窥镜-照明系统主要由光纤与冷光源两部分组成。光纤在临床使用中，反复受弯曲、拉扯、插拔等机械应力作用，极易使其内部光纤折断；频繁污损使用致使光学性能下降明显。其产品性能检测是医用

Medical Endoscope Fiber Optic Testing System

The medical endoscope illumination system mainly consists of two parts: optical fiber and cold light source. In clinical use, optical fibers are repeatedly subjected to mechanical stresses such as bending, pulling, and insertion, which can easily cause internal fiber breakage; Frequent staining and use lead to a significant decrease in optical performance, and product performance testing is an important component of medical endoscope systems.

医用内窥镜冷光源测试系统

医用内窥镜冷光源测试系统具备多种高阶算法、测试辅助软件、可视化图形界面， 可全 方 位的评 价冷光 源的各 类 光辐 射性 能 ，符 合 标准要 求。业 界 领先 的 全功 能模 块

Medical Endoscope Cold Light Source Testing System

The medical endoscope cold light source testing system is equipped with various advanced algorithms, testing assistance software, and visual graphical interfaces, which can comprehensively evaluate the various light radiation performance of the cold light source and meet the standard requirements. The industry-leading fully functional modular design preserves various functional extensions for customers to the greatest extent possible, equipped with a complete tool analysis package, and fully supports customers in testing, evaluating, and analyzing various cold light sources. Fully automated design has been achieved for illumination exceeding limits and uniformity, improving measurement accuracy.

内窥镜质控测试仪

内窥镜质控测试仪临床医用内窥镜质控解决方案专为医用内窥镜质控管理研制的测试分析仪器创新的光学测量结构设计;高效的自动化测试，基于神经网络的大数据质量分析算法为高风险医疗器械的质量安全保驾

Endoscope Quality Control Tester

A testing and analysis instrument specially developed for quality control management of medical endoscopes. Innovative optical measurement structure design, efficient automated testing, and big data quality analysis algorithms based on neural networks safeguard the quality and safety of high-risk medical devices.

测光积分球

积分球一般作为一个理想的漫射光源或匀光器来使用，从而消除由于光源自身特性而造成的出射光束不均匀或者带有偏振方向。积分球之所以有这种特性，主要是由于入射光在积分球内部发生多次漫反射造成的。积分球内表面为

Photometric integrating sphere

Integral sphere is one of the most commonly used measuring instruments in optics. The coating is made of high-quality PTFE material, suitable for UV visible and near-infrared spectra, and has good Lambertian characteristics in this spectral range. The sphere wall has two or more small openings to introduce light or connect photoelectric detectors, and some baffles are designed to prevent the light source from directly shining on the detector, ensuring the uniformity of the test light source. This structure causes multiple diffuse reflections of light before entering the detector, resulting in a very uniform amount of light reaching the detector.

漫反射标准白板

漫反射标准白板白板就是标准白板、参考白板的简称，是一种光学传递标准，是由国家计量院（国家标准局）提供一种已经标定过的、有光谱反射率数据的白板，广大用户要依据这个数据来测量其它样品的光学性能。不管你采用

Diffuse Reflectance Standard Whiteboard

Whiteboard, also known as standard whiteboard or reference whiteboard, is an optical transmission standard provided by the National Institute of Metrology (National Bureau of Standards). It is a calibrated whiteboard with spectral reflectance data that users can use to measure the optical properties of other samples. No matter what instrument or method you use, all measurement data must ultimately be traced back to the standards of the National Institute of Metrology. Only in this way can the measurements of each company be comparable, effective, accurate, and reliable.

ILT750Bili光度计

ILT750彻底改变了胆红素光源的测量方式。告别多点测量和数 学计算。当您将探测器无缝地放在毯子上面或灯下面时， ILT750会自动计算读数。该仪表会在几秒钟内自动为您提供最 小/最大和平均值。无需计

ILT750Bili Photometer

ILT750 has completely changed the measurement method of bilirubin light source. Say goodbye to multi-point measurement and mathematical calculation. When you seamlessly place the detector on top of a blanket or under a light, ILT750 will automatically calculate the reading. The instrument will automatically provide you with minimum/maximum and average values within a few seconds. No need for calculation or calculator! The ILT750 was designed with full consideration of the needs of original equipment manufacturers (OEMs) and distributors.

ILT960UVLS-RAA4光谱辐射计

ILT960-UVLS是ILT960-UV的低杂散光版本。UVLS的杂散光从<0.2%降低到了<0.1%。UVLS最初是为了测试洁净室中的光过滤而设计的，确保对紫外线敏感的产品在生产或存储过程中，这个

ILT960UVLS-RAA4 Spectral Radiometer

ILT96UVLS-RAA4 is also an ideal choice for testing UV/far UV pure light, such as UVC LED, LP, and mercury amalgam lamps, as well as UV light source testing for disinfection and UV curing. All systems come standard with SpectrLight III software, 1-meter fiber optic cable, RAA4 right angle input optics, tripod, hard storage box, as well as calibration certificates and data files traceable to NIST and ISO1025 certification.

ILT350色度计

便携式手持光谱仪/色度仪特征3.5英寸全彩显示屏手持式、人体工学设计、紧凑型测量照度、辐射照度、光合有效辐射密度（PPFD）、勒克斯、英尺烛光、相关色温（CCT）、显色指数（CRI）、CIE1931颜

ILT350Portable Handheld Spectrometer/Colorimeter

The handheld ILT350 Colorimeter is a portable, high-quality, and easy-to-use illuminance spectrophotometer. The product features an ergonomic housing design, making it lightweight and portable, yet fully functional with a built-in full-color display, powerful data capture and analysis software, rechargeable battery, and internal data storage. The menu buttons are intuitive and easy to use.

激光光辐射安全测试系统

LRS激光光辐射安全测量系统聚焦于激光产品关键性能与单一故障条件下可预见、不可预见的损伤评价，含半开源式智能计算与等级评价软件(计算过程展示)，可适用于连续、纳秒级调制，高功率和多模态形式产品。系统核

Laser Radiation Safety Testing System

The LRS Laser Radiation Safety Measurement System focuses on evaluating the key performance and potential damage risks—both foreseeable and unforeseeable—of laser products under normal operation and single-fault conditions. Equipped with a semi-open-source intelligent computation and classification software (with detailed calculation process visualization), the system supports continuous, nanosecond-modulated, high-power, and multi-mode laser products.

宽光谱辐射测试系统

光是未来最好的医药。红外用于理疗，肌体细胞修复，红蓝光治疗皮肤痤疮等机理已被广泛应用。 安全有效的光疗依赖于准确的剂量测试。配备现场质控与实验室级便携式宽光谱辐射测试系统，了解医 疗设备的光输出绝对量

Broad-Spectrum Radiation Measurement System

The broadband radiation testing system is equipped with on-site quality control and laboratory level portable broadband radiation testing system to understand the absolute amount of light output of medical equipment, in order to enhance patients' confidence in treatment under phototherapy light sources. The system adopts a portable monochromator structure design, equipped with cosine photometric probes and high-sensitivity refrigerated end window multiplier tubes, to ensure the accurate implementation of on-site optical radiation testing.

多通道LED光源系统

多通道LED光源系统 简介多通道LED光源系统基于自主研发的核心算法，采用优选的几十种不同峰值波长的LED，实现出射光谱功率分布的可调，其主要应用为照明机构、物体色视觉评价、相机及传感器的测试和校准，

Multichannel LED Light Source System

WeSpectra Multi-channel LED Light Source is an innovative spectral tunable light source to simulate any lighting conditions. The spectral range is from visible to NIR, achieved by selected more than 20 LED channels. The CCT ranges from 2000 to 20000K. It supports multiple light sources connection to create large lighting room for color visual assessment and sensor test.

SpectraEye非接触式二维光谱测量系统

SpectraEye非接触式二维光谱测量系统SpectraEye非接触式二维光谱测量系统是一款自主创新研发的基于影像的光谱测量系统，光谱范围覆盖400-1000nm，基于优化设计的光学结构和分光器件，

Non-contact 2D Spectral Measurement System

WeSpectra SpectraEye non-contact 2D spectral measurement system is based on innovative spectral imaging technology. It is designed for both industrial and academic use. Spectral range covers from 400 to 1000nm. Excellent optical design and components allow excellent optical resolution (FWHM 2nm) and small aberration. SpectraEye software provide complete solutions to measure and analyze accurate color results in both R&D and mass production lines. SpectraEye can measure color samples which are unmeasurable by typical benchtop spectrophotometers, including extreme small samples, powders, multi-colored, irregular-shaped samples, etc.

ILT560微型光谱仪

特征 范围：标准范围350 nm至900 nm（250-900 nm需要RAA4和双光源校准升级）包含NIST可追溯校准典型应用包括： 植物生长/光合有效辐射（PAR）/植物光生物学UV固化系统特性表

ILT560 Miniature Spectrometer

ILT introduces the ILT560 Spectroradiometer. The ILT560 comes standard with an SMA905 receptor, allowing it to be used with various fiber optic cables, including flexible and rigid models.

SpectraEye Point非接触式分光测色仪

SpectraEye Point分光测色仪是一款自主创新研发的非接触式分光光度计。光谱范围覆盖400-1000nm，基于优化的光学设计和紧凑机械结构，令其具有极高的稳定性和极低的台间差，适用于实验室和

Point Non-contact Spectrophotometer

WeSpectra SpectraEye Point Non-contact Spectrophotometer is an innovative spectrophotometer, which is not required to touch the sample. It is designed for both industrial and academic use. Spectral range covers from 400 to 1000nm. Excellent optical design guarantees excellent stability and inter-instrument agreement. The compact design of measurement head can be placed in-line almost anywhere on the production line.